change car details

[ateacmeParticipant]

Hi, I can’t see where I can change fields displayed in “car etails” box in car page backend.

And where I can add/delete them.

Thanks a lot and best regards

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Hi.

Use Fields tab for rename and hide/show fields https://take.ms/u5urQ. You can’t add new fields, but can rename existing ones for your needs.

[ateacmeParticipant]

Hi there,

thanks for your reply but in car settings I can just change the title, not what I see in single car backend.

Furthermore I can’t change details order.

How can I do these things?

[ateacmeParticipant]

And another question: how can I delete predefined value and add a simple unit?

For example fot the actual “carburante” voice I want to delete “diesel” – “benzina” etc. values and set a unit

[ateacmeParticipant]

Hi there, I’m translating and modifying car details label through WPML but there are still some problems:

1) I need to delete predefined values for some details (e.g. “automatic” – “manual” – “semiautomatic” in “transmission” detail)

2) I need to delete details icons (I don’t want to display no icon)

3) in specification box in single car page I don’t see all the details I set as visible in single page – it should be 10 or 11 and instead I can see just 6 of them, furthermore units is not visible (ex. lenght 10 m – m is set but not visible)

4) again in specification box, PDF icon is over price box

[please see attached jpg  where yoou can find settings and results]

5) I can’t translate cars slug changed in permalink, I also tried to reset it in permalink but it doesn’t work

6) texts in car filter widget are not translated (see attached jpg)

Thanks for a reply. Best regards

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Hi.

Please, give me the site url and admin access.

[ateacmeParticipant]

Hi there,

below you can find your temporary admin access

Please note some other things to fix (see attached jpgs):

1) in homepage, at the beginning the slider revolution <span class=”VIiyi” lang=”en”><span class=”JLqJ4b ChMk0b” data-language-for-alternatives=”en” data-language-to-translate-into=”it” data-phrase-index=”0″ data-number-of-phrases=”1″><span class=”Q4iAWc”>is not as wide as the page but, after a couple of seconds, it resizes itself
</span></span></span>

2) again in homepage, in car filter min and max of value “lunghezza f.t.” are different from settings

3) in footer I can’t select social icons

Private Content Hidden

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Hi.

Please, check now.

1. Disable predefined values https://take.ms/kSWGG

2. To disable fields images turn it off https://take.ms/4CI9e

3. Units fixed. I’ll check the fields count.

4. Fixed

5. Permalinks base should be set here https://take.ms/1aExd

6. If you need to use this in two languages, then delete the value you entered and translate the default strings.

[ateacmeParticipant]

Hi, there

thanks but you didn’t consider all the problems and not everything works properly:

1) About disable predefined values, sorry maybe I was inaccurate: I need to have more fields without predefined value and with unit.

1a) Furthermore I need to “move” fields already set, up or down for a better position in boat card.

For example, I’ve used the existing field “mileage” for a filtered value (lunghezza) and this field should be at the firs position in boat card, insted it’s in the second position

Furthermore, in a next futue I could need to add a field like “internal heigt” that must be just after “lenght” and I can’t modify every single field in order to add the new one in the 3 position (for example)

2) in specification box in single car page I don’t see all the details I set as visible in single page – I can see just 6 of them ->(see attached jpg – details)

3) now unit is visible but too much away from number, instead on the left and in car listing page there is no space beetween numbers and units: may I have just 1 space? (see attached jpg – single-car-page)

4) “PFD” link is still on price box (see attached jpg – single-car-page)

4) in homepage, at the beginning the slider revolution is not as wide as the page but, after a couple of seconds, it resizes itself -> not fixed

5) permalink question -> I’ve already deleted the value in permalink settings and translated in WMPL but it doesn’t work (see attached jpg slug-translation)

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Can you give me ftp access? I need to fix fatal error. Or replaces the file wp-content/plugins/pix-cars/pixplugin/admin/classes/class.PixCars.Admin.Setting.MultiToggle.php

Attachments:

You must be logged in to view attached files.

[ateacmeParticipant]

Hi,

I’ve replaced the file from a previous backup

[ateacmeParticipant]

Hi there, I see you’re fixing other problems.

Notice that I can’t translate footer  and neither the widget in car listing (now at https://staging2.panamerayacht.it/it/flotta/). In the widget only title “filter/filtro” is translated)

Please don’t forgot “cars” slug translation problem, it’s very important.

Thanks for a reply and best regards

[ateacmeParticipant]

Hi there, I’ve fix the last two problem in translation.

So, problems that still need your support are:

1) About disable predefined values, sorry maybe I was inaccurate: I need to have more fields without predefined value and with unit.

1a) fixed

2) in specification box in single car page I don’t see all the details I set as visible in single page – I can see just 6 of them

3) fixed

4) “PFD” link is still on price box (fixed only on chrome – still wrong on firefox)

4) in homepage, at the beginning the slider revolution is not as wide as the page but, after a couple of seconds, it resizes itself -> (fixed only on chrome – still wrong on firefox)

5) permalink question -> I’ve already deleted the value in permalink settings and translated in WMPL but it doesn’t work (see attached jpg slug-translation)

6) NEW there is a problem with the filter value potenza kW (ex engine): the max value is different from settings and the filer doesn’t work. Please see the attached jpg with this example: there is just 1 boat with power (potenza kW) less than 180 but the filter widget give me 5 results, that is all the 5 boats existent. The other two filter values work properly. [In the jpg you see the filter in homepage but the problem is the same using the filter in car listing page]

I hope you can reply in a very few time because I need to publish the website as soon as possible. Thanks a lot

 

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Hi.

I’m making a system for adding fields. It may take a couple of days.

[Support teamKeymaster]

The interval between min and max must contain an integer number of steps.

(1000 – 80) / 50 = 18.4 – wrong

(1000 – 50) / 50 = 19 – right
(980 – 80) / 50 = 18 – right

[ateacmeParticipant]

Do you mean to add new fields in the list or to make visible more fields in the forntend?

In the first case, starting from I can move the fields, I was able to use the existing ones in a better way so I need to fix the other problem so I can publish the website

[Support teamKeymaster]

Hi.

We had 4 days off.

1. I’m working on it now. It’s a big piece of work. I have to finish today or tomorrow.

2. I can’t access the site. Did you transfer it?

4. https://take.ms/UPiIh https://take.ms/50Oxt

5. Do you set this option in WPML? https://wpml.org/ru/faq/translate-taxonomy-slugs-wpml/#:~:text=To%20enable%20this%2C%20go%20to,WPML%20%2D%3E%20Taxonomy%20Translation%20page.

[ateacmeParticipant]

Hi, the staging website is still in coming soon, at the moment the access link is still the same (see private content).

1) it’s less important than other problems, please proritize other points

2) in specification box in single car page I still don’t see all the details I set as visible in single page – NOW I see 8 out of 9

3) fixed

4) fixed

5) permalink question -> slug translation is enabled and, in fact, in previuos message I send you also the screenshot about string slug translation. please see the new attached jpg: both of strings “cars” are translated in english (ribs) and italian (gommoni) but I still see “cars” slug

6) NEW there is a problem with the filter value potenza kW (ex engine): the max value is different from settings and the filer doesn’t work. Please see the attached jpg with this example: there is just 1 boat with power (potenza kW) less than 180 but the filter widget give me 5 results, that is all the 5 boats existent. The other two filter values work properly. [In the jpg you see the filter in homepage but the problem is the same using the filter in car listing page]

 

Private Content Hidden

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

Can you give me ftp access?

And set cars slug to default, like here https://take.ms/FwZwk, only with english translte.

[ateacmeParticipant]

below you can find ftp access.

I’m not sure about what you asked me for cars slug. Please see if now is set as you want. Please conider that english slug must be “ribs” and italian one “gommoni” thats why I changed original language in “albanian”.

Thanks

Private Content Hidden

[Support teamKeymaster]

Yes, that’s right. Thanks.

[ateacmeParticipant]

I’ve just fixed slug problem

[ateacmeParticipant]

So, at the moment, remaining problems are:

2) in specification box in single car page I still don’t see all the details I set as visible in single page – NOW I see 8 out of 9

6) NEW there is a problem with the filter value potenza kW (ex engine): the max value is different from settings and the filer doesn’t work. Please see the attached jpg with this example: there is just 1 boat with power (potenza kW) less than 180 but the filter widget give me 5 results, that is all the 5 boats existent. The other two filter values work properly.

and 1) future possibility to add more fields

between this afternoon and tomorrow moring I’ll publish the website but you can still work at the staging copy

[Support teamKeymaster]

Hi.

I commented out the permalink settings in the plugin code, when migrating the site, use the PixCars plugin from your server.

2. You use financing fields for Peso battello and Potenza Max. It’s display when Show financing info setting on https://take.ms/iy8VP. And under the fields list. Better use VIN and Horesepower fields for this purpose.

6. I’m figuring it out now.

[ateacmeParticipant]

Hi there,

do you mean I have to use the plugin version that is on my server and not the original one? Is’n it?

What about netx plugin update? you’ll report this modify in all future versions?

2) I’ve changed that 2 fields and re-entered values, now it works

6) I see you fixed also this problem

Thanks a lot.

[ateacmeParticipant]

Sorry, I dont’ know if you’re still working on the website, I see an error in car filter in homepage, please see attached jpg

Attachments:

You must be logged in to view attached files.

[Support teamKeymaster]

6. Fixed.

[ateacmeParticipant]

thanks a lot

 

[Support teamKeymaster]

Try to update PO file for PixCars plugin in the wpml. I added a condition to the plugin.

[ateacmeParticipant]

Sorry, I don’t understand…